Spectrum Microwave by API Technologies - HotlineSUPPORT HOTLINE - 888.553.7531

Content is coming here as you probably can see....TESTING

FREQUENCY MULTIPLIERS

Spectrum Microwave’s line of both low phase noise Frequency Multipliers and low noise, odd order, SRD based Frequency Multipliers deliver superior AM phase noise performance as well as excellent spurious levels. These Frequency Multipliers come in a variety of configurations including Dividers, Doublers, Triplers, x4 Multipliers, x8 Multipliers, x15 Multipliers, x16 Multipliers, and a number of higher order multipliers including a x48 Multiplier design.

This family of Multipliers offers additional filtering through a very narrow high Q bandpass filter. All internal semiconductors are housed in rugged hermetically sealed packages to insure excellent performance in military environments.

Superior low phase noise performance coupled with low signal degradation.

Superior low phase noise performance
coupled with low signal degradation.

All internal semiconductors are housed in rugged hermetically sealed packages.

All internal semiconductors are housed in
rugged hermetically sealed packages.

Wide operating temperature range, integral voltage regulation and conduction cooled.

Wide operating temperature range, integral
voltage regulation and conduction cooled.

Lightweight aluminum housing and SMP style connectors.

Lightweight aluminum housing
and SMP style connectors.

Low phase noise performance/jitter performance to -146 dBc/Hz @ 10 kHz offset.

Low phase noise performance/jitter performance
to -146 dBc/Hz @ 10 kHz offset.

Covers input frequency ranges of 5 to 500 MHz.

Covers input frequency ranges of 5 to 500 MHz.

Output frequencies ranging from 100 to 1000 MHz.

Output frequencies ranging from 100 to 1000 MHz.

FEATURES
Low Signal Degradation

Low Signal Degradation

 To download more information about our low signal degradation, click here! To message to one of our engineers about our low signal degradation, click here! To request pricing information about our low signal degradation, click here!
  • Superior phase noise performance coupled with low signal degradation are some of the performance features built into this family of multipliers.
  • A linear amplifier drives a step recovery diode thereby multiplying an input 100 MHz clock signal by a factor of x21 to x26. A pair of 3-pole ceramic bandpass filters and a pair of linear driver amplifiers improve the spurious response, as well.
Multiple Frequency Outputs

Multiple Frequency Outputs

 To download more information about our Multiple Frequency Outputs, click here! To message to one of our engineers about our multiple frequency outputs, click here! To request pricing information about our multiple frequency outputs, click here!
  • Our designs, like this model BXMF1014, provide x2, x4, x8 and x48 frequency outputs from a single input frequency. Multipliers in this family are designed for airborne applications and have field replacable RF connectors.
  • The entire assembly is designed to be slid into a channel for systems installation without the need to solder wires or screw on connectors. This design incorporates single stage active doublers, amplifiers, SRD multipliers, power splitters, bandpass filtering, and more.
Flat Frequency Response

Flat Frequency Response

 To download more information about our flat frequency response, click here! To message to one of our engineers about our flat frequency response, click here! To request pricing information about our flat frequency response, click here!
  • Spectrum Microwave multipliers, like this 310-027015-001 LO divider, provide the system designer with a compact, fast-switching building block for LO division applications.
  • Cascades of solid-state prescalers provide frequency division by a factor of 2, 4 or 8. Each of the prescaler chains is followed by a filter to improve the spurious response and an amplitude corrector to achieve flat frequency response.
Low Additive Phase Noise

Low Additive Phase Noise

 To download more information about our Low Additive Phase Noise, click here! To message to one of our engineers about our low additive phase noise, click here! To request pricing information about our low additive phase noise, click here!
  • This family of multipliers, based on multiple passive doubler/amplifier combinations, covers input frequency ranges of 5 to 500 MHz with output frequencies ranging from 100 to 1000 MHz.
  • Additive phase noise testing also ensures excellent low phase noise/jitter performance to -146 dBc/Hz @ 10 kHz offset. Internal amplifiers and doublers are also contained in rugged TO-8 hermetic packages for excellent performance over all harsh military environmental conditions.
Feature Rich Designs

Feature Rich Designs

 To download more information about our feature rich designs, click here! To message to one of our engineers about our feature rich designs, click here! To request pricing information about our feature rich designs, click here!
  • Our multipliers boast the following features: lightweight aluminum housing, SMP style connectors, wide operating temperature range, integral voltage regulation, and conduction cooled.
  • Learn about more of our customizable features in our Frequency Sources Brochure!

FREE DESIGN SOFTWARE